Simpson MBHAR3.56/9.25 Masonry Hanger - Skewed 45 Degrees Right, Made to Order Non-Returnable BC/BCS Post Caps No Predrilling Required: The SDS

No Predrilling Required: The SDS screws are designed for high capacity without the need for predrilling

Minimum end and edge distance for Titen® screws is 1 1/2"

Temperature rating: Rated for up to 275°F with a continuous rating of 212°F

increasing connection strength and reducing the number of fasteners needed

Multiple Finish Options: Hot Dip Galvanized: ideal for exterior

Simpson MBHAR3.56/9.25 Masonry Hanger - Skewed 45 Degrees Right, Made to Order Non-Returnable BC/BCS Post Caps No Predrilling Required: The SDSThe MBHA is a single piece, non welded connector available for solid sawn, truss and engineered wood products. The MBHA hangers feature a G90 galvanized coating which is not designed for use with treated lumber and should not be used for exterior applications. Use all specified fasteners. NOTE: The correct fasteners installed in the correct position must be used to achieve published load values California Residents: WARNING